Step 3 Wireless connections
Active subwoofer wireless connection
Preparation
≥Turn on the main unit.
Press [BÍ CI].
Bluetooth® connection
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly.
≥Refer to the operating instructions of the Bluetooth® device for further instruction on how to connect a Bluetooth® device.
Preparation
≥Turn on the Bluetooth® feature of the device and place the device near the main unit.
Bluetooth® pairing
Press [
] to select “BLUETOOTH”.
≥If “PAIRING” is indicated on the display, go to step 3.
Precautions
Active subwoofer on/off button [B Í C I] Use this button to turn the active subwoofer on and off.
CI:
The active subwoofer is on.
BÍ:
The active subwoofer is off.
The active subwoofer will still consume a small amount of power even when it is turned off (B, Í).
Check that the wireless link is activated.
WIRELESS LINK indicator
Lights red:
The wireless link is not activated.
Lights green:
The wireless link is activated.
Blinks green:
The active subwoofer is trying to activate the wireless link with the main unit.
The wireless link will be activated when the main unit and the active subwoofer are both turned on.
Press and hold [
] until “PAIRING” is indicated on the display.
Select
≥ If prompted for the passkey on the Bluetooth® device, enter “0000”. |
| |
≥ Once the Bluetooth® device is connected, the name of the |
| |
connected device will be indicated on the display for a few |
| |
seconds. | started | |
| ||
≥ You can register up to 8 devices with this system. If a 9th | ||
Getting | ||
device is paired, the device that has not been used the | ||
| ||
longest will be replaced. |
|
Connecting a paired
Bluetooth® device
Press [
] to select Bluetooth® mode.
≥If “BLUETOOTH READY” is indicated on the display, go to step 3.
Press and hold [
] until “BLUETOOTH READY” is indicated on the display.
Select
∫Disconnecting a Bluetooth® device
Press and hold [
] until the “BLUETOOTH READY” is indicated on the display.
≥When “BLUETOOTH” is selected as the source, this system will automatically try and connect to the last connected Bluetooth® device.
≥This system can only be connected to one device at a time.
≥To change the sound quality, refer to page 24 “LINK MODE”.
RQT9903 19
