Getting started
Precautions
RQT9903 15
Additionally required accessories (commercially available)
≥Fall prevention cord ...................................................................................................................... k 2
≥Screw eyes (to attach the fall prevention cord)............................................................................. k 2
≥Use commercially available screws that are capable of supporting over 33kg (72.8 lbs).
≥Use a cord that is capable of supporting over 33kg (72.8 lbs) (with a diameter of about 1.5 mm (1/16q)).
Attach the cord to the main unit.
ACord§
§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5mm (3/16q) apart from the tip, at an angle of 45o (as illustrated above).
Place the main unit in the desired position and attach each cord onto the
rack or table.
≥Make sure that the slack of the cord is minimal.
≥Do not lean the main unit against the TV or wall.
BScrew eye
≥Attach at a position capable of supporting over 33kg (72.8 lbs).
≥Depending on the placement of the main unit, the screwing position of the screw eye may differ.
When placing the main unit on a rack or on a table
SC-HTB880PP_RQT9903-Y.book 15 ページ 2014年5月8日 木曜日 午後6時13分