Installing the TV
Cable and Antenna If your cable provider does not feature local channels, you may find this set up convenient.
✍This connection applies to all models except
Cable Box Connections
CATV cable | AUX |
| Rear of TV |
(No connection to |
|
TO CONVERTER) | TO CONVERTER |
| |
Antenna cable |
|
VHF/UHF
Select CABLE or antenna (ANT) mode by pressing ANT on the remote control.
✍In order to receive channels with an antenna, you need to turn your Cable to OFF and perform the Auto Program function (see page 29).
Some pay cable TV systems use scrambled or encoded signals that require a cable box to view all channels.
Cable Box
1Connect the coaxial connector from your cable service to the cable box’s IN jack.
2Using a coaxial cable, connect the cable box’s OUT jack to the TV’s VHF/UHF jack.
Cable | VHF/UHF |
Rear of TV
INOUT
Cable box
✍If you will be controlling all channel selection through your cable box, you should consider using the Channel Fix feature (see page 29).
7