Operations
28-EN

Adjusting the picture tilt

You can adjust the picture tilt if it is not aligned to the
TV screen. This may happen due to the direction of the
earth’s magnetic fields in relation to the TV position.
1Press MENU.
2Make sure the cursor (z) appears in the A/V
CONTROL menu ( ), and press ENTER.
3Press V or v to move the cursor (z) to TILT
CORRECT, and press ENTER.
4Press V/b/v/B to select the most suitable
value to adjust the picture tilt, and press
ENTER.
TILT CORRECT:
–5 N –4 N –3 N –2 N –1 N 0 n +1 n +2 n +3 n+4 n +5
Press v/BPress V/b
Customizing the TV

Using the AV OUT (advanced rec-out)

terminal

You can select the output signal from the MON/TV
OUT jacks at the rear of the TV. However, the signals of
the PROGRAM INDEX, STROBE, PIP modes, and the
Teletext broadcast (for KV-E29MH11/E29MN11 only)
cannot be output even though MONITOR is selected.
1Press MENU.
2Press V or v to move the cursor (z) to the
FEATURES menu ( ), and press ENTER.
3Press V or v to move the cursor (z) to AV
OUT, and press ENTER.
4Press V/b/v/B to select the output signal,
and press ENTER.
Select To
TV Output the signal of the TV broadcast.
MONITOR Output the signal of the picture you are
watching as a main picture.
Note
• Do not change the channel while recording with a VCR
through the MON/TV OUT jacks. If you change the channel, it
also changes the channel you are recording.
A / V CONTROL
DYNAMIC
SOFT
STANDARD
PERSONAL
VIDEO AD JUST
AUDIO AD JUST
TI LT CORRECT: 0
MENU
A / V CONTROL
DYNAMIC
SOFT
STANDARD
PERSONAL
VIDEO AD JUST
AUDIO AD JUST
TI LT CORRECT: 0
MENU
GAME MODE
HYPER SURROUND:
OFF
MONITOR
AV OUT:
FEATURES
ENTER ENTER