Sony KV-E29MN11, KV-E29MF1, KV-E29MH1 manual Disabling program positions, Select the desired channel

Press V/b/v/Bto select ON, and press ENTER.

4 Press Vor vto move the cursor (z) to

MANUAL PROGRAM, and press ENTER.

		MANUA L PROGRAM
ENTER	ENTER	PR : 0 1
		T V SYS : B / G
		AT T :	OFF
		VHF	LOW

5 Select the program position to which you want to preset a channel.

(1)Make sure the cursor (z) appears beside PR, and press ENTER.

(2)Press V/b/v/Buntil the program position you want appears on the menu, and press ENTER.

6 Select the desired channel.

(1)Press Vor vto move the cursor (z) to VHF LOW, and press ENTER.

(2)Press V/b/v/Buntil the desired channel picture appears on the TV screen, and press ENTER.

7 Press MENU to return to the normal screen.

If the TV signal is too strong

The picture may be distorted. You can reduce the picture distortion as described below.

1Display the PRESET menu.

2Press Vor vto move the cursor (z) to MANUAL PROGRAM, and press ENTER.

3Press Vor vto move the cursor (z) to ATT, and press ENTER.

4Press V/b/v/Bto select ON, and press ENTER.

If the TV system is not properly selected

The picture color may be poor and/or the sound may be noisy. In this case, select the appropriate TV system.

1Press PROGR +/– or the number buttons to select the program position.

2Display the PRESET menu.

3Press Vor vto move the cursor (z) to TV SYS, and press ENTER.

4Press V/b/v/Buntil the appropriate TV system appears, and press ENTER.

Notes

•The TV system and the ATT (attenuator) settings are memorized for each program position.

•If you do not know your local TV system, consult your nearest Sony dealer or authorized service center.

Disabling program positions

By disabling unused or unwanted program positions, you can skip those positions when you press PROGR +/–.

1	Press MENU.
2	Press Vor vto move the cursor (z) to the
	PRESET menu ( ), and press ENTER.

3 Press Vor vto move the cursor (z) to SKIP, and press ENTER.

4 Press Vor vuntil the unused or unwanted program position appears on the menu, and press ENTER.

5

6 To disable other program positions, repeat steps 4 and 5.

7 Press MENU to return to the normal screen.

To cancel the skip setting

1Display the PRESET menu.

2Press Vor vto move the cursor (z) to SKIP, and press ENTER.

3Press Vor vuntil the program position you want to cancel the skip setting appears, and press ENTER.

4Press V/b/v/Bto select OFF, and press ENTER.

12-EN Getting Started