Notes

•If you connect a monaural VCR, connect the yellow plug to (the yellow jack) and the black plug to -L (MONO) (the white jack).

•If you connect a VCR to the 8 (antenna) terminal, preset the signal output from the VCR to the program number 0 on the TV.

•If both (S video input) and t 1 (video input) at the rear of your TV

are input at the same time, the (S video input) is automatically selected. To view the video input to t 1 (video input), disconnect the S video cable.

•Do not connect video equipment to the t 3 (video input) jacks at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen.

•When no signal is input from the connected video equipment, the TV screen becomes blue.

Step 2

Insert the batteries into the remote

Your Using TV New

Note

•Do not use old batteries nor use different types of batteries together.

Step 3

Preset the channels automatically

Front of TV

1

2

Tips

•If you want to stop the automatic channel presetting, press MENU.

•If your TV has preset an unwanted channel or cannot preset a particular channel, then preset your TV manually (see page 28).

Note (KV-XA29M50/XA25M50 only)

•During automatic channel presetting, your TV screen will indicate “B/G”, “I”, ”D/K” or “M” for the TV system (“TV SYS”).

Using Your New TV 5