Connecting Your TV
TV, Cable box, and Cable
KV-27FS16, KV-27FV16, KV-32FS16, KV-29FV16 only
For this set up, you can switch between scrambled channels (through your cable box) and normal (CATV) channels by pressing 
.
Rear of TV
Cable Box 
Operating Instructions
TV, VCR, and Cable box
Rear of TV
3
VCR
KV-27FV16/29FV16/29FV16C/32FS12/32FS16
—
From Cable
2
Cable box 
1
Cable
4(Optional connection)
10 —
When using PIP, the AUX input cannot be viewed in the window picture.
7
1Connect the coaxial cable from your cable service to the IN jack on your cable box.
2Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack on your VCR.
3Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
If you will be controlling all channel selection through your cable box, you should consider using the Channel Fix feature, (see page 26).
(Optional connection)
4If your VCR is equipped with video outputs, you can get better picture quality by connecting A/V cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
For optimum picture quality, use S VIDEO instead of the yellow A/V cable.
S VIDEO does not provide sound, the audio cables must still be connected.
You can use the 
button to switch between the VHF/UHF and VIDEO inputs.
8
