Sony KV 32FV27, KV 36FV27 28

Installing the TV

Connecting a Satellite Receiver with a VCR

1Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.

2Connect the CATV cable to the VCR’s VHF/UHF IN jack.

3Using a coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack.

4Using an A/V cable, connect the satellite receiver’s Audio and Video OUT jacks to the VCR’s Audio and Video IN jacks.

5Using an A/V cable, connect the VCR’s Audio and Video OUT jacks to the TV’s Audio and Video IN jacks.

Satellite antenna cable

Satellite receiver

	CATV
	Coaxial
VCR	cable
VCR

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

Coaxial cable

A/V cable

✍If the satellite receiver and VCR have S VIDEO jacks, you can use an S VIDEO cable to improve picture quality; replace the yellow video cable of each combination A/V cable with the S VIDEO cable. You will still need audio cables for sound.

Contents

Operating Instructions KV-32FV27 KV-36FV27 Page Page Page Page Page Contents Page Introducing the FD Trinitron Wega Features Inserting Batteries Button Descriptions Page Page Installing the TV Note About the AC Power Cord Front Panel Menu Controls TV Rear Panel Page Connecting Directly to Cable or to an Antenna Cable and Antenna Basic Cable Box Connections Page Page Page ❑You want to use the PIP feature ❑Use the PIP feature ❑Record both regular CATV and scrambled channels To connect a cable box and a VCR, you will need: ❑A small, inexpensive device known as a splitter Page Turn on the cable box and VCR. Use the remote control’s Page 3Connect a coaxial cable from your cable or antenna to the TV’s VHF/UHF jack Page Page Page Using three separate component video cables, connect the DVD player’s Y, P You cannot record the signal from any equipment connected into the Y, P Page If you have a mono camcorder, connect its audio output to the TV’s AUDIO L jack Page Using Auto Setup Page Using the Features Page Displaying Picture in Picture PIP Functions ❑Use the yellow PIP CH+/- button to scroll through the TV channels 1Connect the CATV cable to the UHF/VHF input on the back of the TV 3Tune to one image in the main picture 4Tune to a second image in the PIP window You can then SWAP the images on the TV screen Installing the Battery Using the Headphones Listening to Sound from PIP Main and Window Pictures Using the Menus Selecting Video Options Page Selecting Audio Options Page Selecting Channel Options Page Using the Parent Menu US Models: Selecting Custom Rating Options Viewing Blocked Programs Canadian Models: Selecting Timer Options Selecting Setup Options Page Basic Options Other Information The remote control is preset to operate Sony-brandvideo equipment Check the list of ✍You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 4Enter the three-digitmanufacturer’s code number 5Press ENTER Page Operating a VCR Operating a DVD Player Operating a Cable Box Operating a Satellite Receiver Operating an MDP (Laserdisc Player) Page Page Page Page Page Index Page Simulated 40, 50 Sleep timer/button sound effect (3-D),adjusting 40, 50 speakers specifications 58-59 Standby/Stereo LED 40 Steady Sound tape-to-tapeediting 18 tilt, correcting 49 Time Timer