Sony KV 32FV27, KV 36FV27 Using Auto Setup

Installing the TV

Setting Up the TV Automatically

After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Setup screen appears when you turn your TV on for the first time after installing it. If you do not want to set up the channels at this time, you can do it later by using the Auto Program feature in the Channel menu (see pages 42 and 43).

✍The Auto Setup feature does not apply for installations that use a cable box for all channel selection.

Using Auto Setup	1
	2

Press POWER to turn on the TV.

Press the TV function button on the remote control.

3Press CH+ on the front of your TV to run the Auto Setup or press CH– to exit. If you use the channel buttons on your remote control, be sure to use the main set of buttons.

To reset TV to factory settings

1Turn the TV on.

2Hold down the RESET button on the remote control.

3Press and release the POWER button on the TV. (The TV will turn itself off, then back on.)

4Release the RESET button.

Contents

Operating Instructions KV-32FV27 KV-36FV27 Page Page Page Page Page Contents Page Introducing the FD Trinitron Wega Features Inserting Batteries Button Descriptions Page Page Installing the TV Note About the AC Power Cord Front Panel Menu Controls TV Rear Panel Page Connecting Directly to Cable or to an Antenna Cable and Antenna Basic Cable Box Connections Page Page Page ❑You want to use the PIP feature ❑Use the PIP feature ❑Record both regular CATV and scrambled channels To connect a cable box and a VCR, you will need: ❑A small, inexpensive device known as a splitter Page Turn on the cable box and VCR. Use the remote control’s Page 3Connect a coaxial cable from your cable or antenna to the TV’s VHF/UHF jack Page Page Page Using three separate component video cables, connect the DVD player’s Y, P You cannot record the signal from any equipment connected into the Y, P Page If you have a mono camcorder, connect its audio output to the TV’s AUDIO L jack Page Using Auto Setup Page Using the Features Page Displaying Picture in Picture PIP Functions ❑Use the yellow PIP CH+/- button to scroll through the TV channels 1Connect the CATV cable to the UHF/VHF input on the back of the TV 3Tune to one image in the main picture 4Tune to a second image in the PIP window You can then SWAP the images on the TV screen Installing the Battery Using the Headphones Listening to Sound from PIP Main and Window Pictures Using the Menus Selecting Video Options Page Selecting Audio Options Page Selecting Channel Options Page Using the Parent Menu US Models: Selecting Custom Rating Options Viewing Blocked Programs Canadian Models: Selecting Timer Options Selecting Setup Options Page Basic Options Other Information The remote control is preset to operate Sony-brandvideo equipment Check the list of ✍You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 4Enter the three-digitmanufacturer’s code number 5Press ENTER Page Operating a VCR Operating a DVD Player Operating a Cable Box Operating a Satellite Receiver Operating an MDP (Laserdisc Player) Page Page Page Page Page Index Page Simulated 40, 50 Sleep timer/button sound effect (3-D),adjusting 40, 50 speakers specifications 58-59 Standby/Stereo LED 40 Steady Sound tape-to-tapeediting 18 tilt, correcting 49 Time Timer