Setup
SETUP
Cable Box Only | For best results, use this connection if: | |
| ❑ | Your cable company scrambles all channels, which requires you |
|
| to use a cable box. |
| ❑ | You do not have a VCR. (If you have a VCR, see pages 22 and 24.) |
With this connection you can:
❑Use the TV remote control to change channels coming through the cable box to the TV’s VHF/UHF jack. (You must first program the remote control for your specific cable box.)
About Using This Connection with Dual Picture (Twin View, etc.) Features
With this connection, all channels come into the TV through your cable box and only one unscrambled signal is sent to the TV, so you cannot use the dual picture features.. If some of your channels are scrambled, but others are not, consider using the “Cable Box and Cable” connection on page 18 instead.
To connect the cable box
1Connect the CATV cable to the cable box’s input jack.
2Use a coaxial cable to connect the cable box’s output jack to the TV’s VHF/UHF jack.
3Run the Auto Setup program, as described in “Setting Up the Channel List” on page 38.
| CATV | Coaxial cable | TV |
| cable |
|
|
| 1 | 2 | VHF/UHF |
|
| ||
| IN | OUT |
|
| Cable box |
| |
Notes on Using This Connection |
|
|
|
To Do This ... | Do This ... |
|
|
Use the cable box | Tune the TV to the channel the cable box is set to (usually channel 3 or 4) | ||
| and then use the cable box to switch channels. | ||
Set up the TV remote control | Program the remote control. See “Programming the Remote Control” on | ||
to operate the cable box | pages |
|
|
Activate the remote control to | Press SAT/CABLE FUNCTION. |
| |
operate the cable box |
|
|
|
Prevent the accidental | When using the cable box, you need the TV to stay on the channel the cable | ||
switching of TV channels | box is set to (usually channel 3 or 4). You can use the TV’s Channel Fix | ||
| feature to lock in a specific channel. For details, see “Using the Channel | ||
| Menu” on page 68. |
| |
20
