Sony KV 36FS13 15

	Introducing the FD Trinitron Wega

Button	Description

qaPOWER buttons	Turn on and off the TV and other audio/video
(GREEN)	equipment.

qsFUNCTION buttons	Select the equipment (TV, VCR/DVD, SAT/CABLE)
(WHITE)	that you want to operate. The indicator lights up
	momentarily when pressed to show which device the
	remote control is operating.

qdTV/VIDEO	Cycles through the video equipment connected to your
	TV’s video inputs.

qfANT	Changes the VHF/UHF input to the AUX input.

qgDISPLAY	Press once to display the current time and channel
	label (if set) and channel number. Press again to turn
	Display off. For details on setting the time, see “To set
	the Current Time” on page 45.

qhMTS/SAP	Cycles through the Multi-channel TV Sound (MTS)
	options: Stereo, Auto-SAP(Second Audio Program), and
	Mono. For details, see “Using the Audio Menu” on
	page 38.

qj0 - 9 and ENTER	Press 0 - 9 to select a channel, the channel changes after
	2 seconds. Press ENTER to select immediately.

qkGUIDE	Displays the program guide of your satellite antenna.

ql	Arrows and Select. Pressing down on the center
	button selects the item.

w;MENU	Press to display the TV menu. Press again to exit from
	the menus.

waCH+/-	Changes the channel in the main picture.

7

Contents

Operating Instructions KV-36FS13 KV-36FS17 Page Page Page Page Page Contents Page Introducing the FD Trinitron Wega Features Inserting Batteries Button Descriptions Page Page Page Page Installing the TV Note About the AC Power Cord Front Panel Menu Controls TV Rear Panel Page Connecting Directly to Cable or an Antenna Cable and Antenna (KV-36FS17only) Basic Cable Box Connections Page Page Page ❑You want to use the PIP feature ❑Use the PIP feature ❑Record both regular CATV and scrambled channels To connect a cable box and a VCR, you will need: ❑A small, inexpensive device known as a splitter Page Turn on the cable box and VCR. Use the remote control’s Page 3Connect a coaxial cable from your cable or antenna to the TV’s VHF/UHF jack Page Page Page Using three separate component video cables, connect the DVD player’s Y, P You cannot record the signal from any equipment connected into the Y, P Page If you have a mono camcorder, connect its audio output to the TV’s AUDIO L jack Using Auto Setup Using the Features Page Displaying Picture in Picture PIP Functions ❑Use the yellow PIP CH+/- button to scroll through the TV channels 1Connect the CATV cable to the UHF/VHF input on the back of the TV 3Tune to one image in the main picture 4Tune to a second image in the PIP window You can then SWAP the images on the TV screen Page Using the Menus Selecting Video Options Page Selecting Audio Options Page Selecting Channel Options Page Using the Parent Menu US Models: Selecting Custom Rating Options Viewing Blocked Programs Canadian Models: Viewing Blocked Programs Selecting Timer Options Selecting Setup Options Page Basic Options Other Information The remote control is preset to operate Sony-brandvideo equipment Check the list of ✍You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 4Enter the three-digitmanufacturer’s code number 5Press ENTER Page Operating a VCR Operating a DVD Player Operating a Cable Box Operating a Satellite Receiver Operating an MDP Page Page Page Index Page tape-to-tapeediting 20 tilt, correcting 47 Time VCR Video Modes, selecting Wega, described 2 widescreen 47 widescreen, described