Sony KV 36FS13 Displaying Picture in, Picture

Using the Features

Using Picture in Picture (PIP) (KV-36FS17 only)

Picture in Picture (PIP) allows you to watch two channels simultaneously — one in the main window and another in a secondary (PIP) window.

Displaying Picture in

Picture	Indicates which picture is
	currently receiving sound

9 6

Main
picture	2
	2

Main picture channel number in green

Window picture channel number in white

Window picture

To use PIP:

1Make sure your TV is tuned to a channel that you know is airing programming.

2Press the button (or the button labeled PIP). The window picture appears.

3Use the yellow-labeled buttons on your remote control (see diagram) to control the PIP features (which are listed on the next page).

To check your PIP:

1Tune your TV to a channel that you know is airing programming.

2Press SWAP and select that same channel as the main window. You should now have the same program playing in both your main window and your picture window.

3Use the PIP (yellow) CH+/- buttons to change the channel in the picture window.

✍You must press TV (FUNCTION) before you can control PIP with the yellow- labeled buttons.

The AUX input cannot be viewed in the PIP window.

(Continued on the next page)

31

Contents

Operating Instructions KV-36FS13 KV-36FS17 Page Page Page Page Page Contents Page Introducing the FD Trinitron Wega Features Inserting Batteries Button Descriptions Page Page Page Page Installing the TV Note About the AC Power Cord Front Panel Menu Controls TV Rear Panel Page Connecting Directly to Cable or an Antenna Cable and Antenna (KV-36FS17only) Basic Cable Box Connections Page Page Page ❑You want to use the PIP feature ❑Use the PIP feature ❑Record both regular CATV and scrambled channels To connect a cable box and a VCR, you will need: ❑A small, inexpensive device known as a splitter Page Turn on the cable box and VCR. Use the remote control’s Page 3Connect a coaxial cable from your cable or antenna to the TV’s VHF/UHF jack Page Page Page Using three separate component video cables, connect the DVD player’s Y, P You cannot record the signal from any equipment connected into the Y, P Page If you have a mono camcorder, connect its audio output to the TV’s AUDIO L jack Using Auto Setup Using the Features Page Displaying Picture in Picture PIP Functions ❑Use the yellow PIP CH+/- button to scroll through the TV channels 1Connect the CATV cable to the UHF/VHF input on the back of the TV 3Tune to one image in the main picture 4Tune to a second image in the PIP window You can then SWAP the images on the TV screen Page Using the Menus Selecting Video Options Page Selecting Audio Options Page Selecting Channel Options Page Using the Parent Menu US Models: Selecting Custom Rating Options Viewing Blocked Programs Canadian Models: Viewing Blocked Programs Selecting Timer Options Selecting Setup Options Page Basic Options Other Information The remote control is preset to operate Sony-brandvideo equipment Check the list of ✍You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 4Enter the three-digitmanufacturer’s code number 5Press ENTER Page Operating a VCR Operating a DVD Player Operating a Cable Box Operating a Satellite Receiver Operating an MDP Page Page Page Index Page tape-to-tapeediting 20 tilt, correcting 47 Time VCR Video Modes, selecting Wega, described 2 widescreen 47 widescreen, described