Sony KV 36FS13 19

	Installing the TV
Back Panel Descriptions
Connection	Description

1AUX	Allows you to view local and cable channels if your cable
(KV-36FS17)	provider does not feature local channels. You can switch
	between local and cable channels easily by pressing ANT
	on the remote control. Devices connected to the AUX
	input cannot be viewed in PIP.

2TO CONVERTER This is a VHF/UHF out jack that lets you set up your TV

(KV-36FS17) to switch between scrambled channels (through a cable

box) and normal cable channels (CATV). Use this jack instead of a splitter to get better picture quality when needing to switch between scrambled and unscrambled cable channels.

3VHF/UHF	Connects to your VHF/UHF antenna or cable.

4S VIDEO	Connects to the S VIDEO OUT jack of your VCR or other
	S VIDEO-equipped video component. Provides better
	picture quality than the VHF/UHF jacks or the Video IN
	jack.

5AUDIO (L/R)/ Connects to the audio and video OUT jacks on your VCR

VIDEO	or other video component. A third video input (VIDEO
	2) is located on the front panel of the TV. The Audio and
	Video IN jacks provide better picture quality than the
	VHF/UHF jack.

6Y, PB, PR, L, R Connects to your DVD player’s or Digital Set-top box’s component video (Y, PB, PR) and audio (L/R) jacks.

7AUDIO OUT Connects to the left and right audio inputs of your audio

(VAR/FIX)or video component. You can use these outputs to listen

L (MONO)/R to your TV’s audio through your stereo system.

11

Contents

Operating Instructions KV-36FS13 KV-36FS17 Page Page Page Page Page Contents Page Introducing the FD Trinitron Wega Features Inserting Batteries Button Descriptions Page Page Page Page Installing the TV Note About the AC Power Cord Front Panel Menu Controls TV Rear Panel Page Connecting Directly to Cable or an Antenna Cable and Antenna (KV-36FS17only) Basic Cable Box Connections Page Page Page ❑You want to use the PIP feature ❑Use the PIP feature ❑Record both regular CATV and scrambled channels To connect a cable box and a VCR, you will need: ❑A small, inexpensive device known as a splitter Page Turn on the cable box and VCR. Use the remote control’s Page 3Connect a coaxial cable from your cable or antenna to the TV’s VHF/UHF jack Page Page Page Using three separate component video cables, connect the DVD player’s Y, P You cannot record the signal from any equipment connected into the Y, P Page If you have a mono camcorder, connect its audio output to the TV’s AUDIO L jack Using Auto Setup Using the Features Page Displaying Picture in Picture PIP Functions ❑Use the yellow PIP CH+/- button to scroll through the TV channels 1Connect the CATV cable to the UHF/VHF input on the back of the TV 3Tune to one image in the main picture 4Tune to a second image in the PIP window You can then SWAP the images on the TV screen Page Using the Menus Selecting Video Options Page Selecting Audio Options Page Selecting Channel Options Page Using the Parent Menu US Models: Selecting Custom Rating Options Viewing Blocked Programs Canadian Models: Viewing Blocked Programs Selecting Timer Options Selecting Setup Options Page Basic Options Other Information The remote control is preset to operate Sony-brandvideo equipment Check the list of ✍You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 4Enter the three-digitmanufacturer’s code number 5Press ENTER Page Operating a VCR Operating a DVD Player Operating a Cable Box Operating a Satellite Receiver Operating an MDP Page Page Page Index Page tape-to-tapeediting 20 tilt, correcting 47 Time VCR Video Modes, selecting Wega, described 2 widescreen 47 widescreen, described