Programming CD tracks (continued)

1 Place CDs and close the front cover.

2 Press FUNCTION repeatedly until “CD” appears in the display.

3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display.

4 Press DISC SKIP to select a CD.

5 Turn the jog dial until the desired track appears in the display.

Wide display

 

Disc number

Total playing time

Track number

Normal display

Disc number

Track number Total playing time

6 Press PLAY MODE once.

The track is programmed. First “STEP” and the programmed playing order appear, then the total playing time appears.

Wide display

The last programmed track Total playing time

Normal display

The last programmed track Total playing time

7 Repeat steps 4 through 6 to program additional tracks.

Skip step 4 to select tracks from the same disc.

8 Press ·P.

All the tracks play in the order you selected.

To cancel Program Play

Press PLAY MODE repeatedly until “PROGRAM,” “ALL DISCS SHUFFLE,” or “1 DISC SHUFFLE” disappears from the display.

To

Press

Check the program

CHECK on the remote

 

repeatedly. After the

 

last track, “CHECK

 

END” appears.

 

 

Clear the last selected

CLEAR on the remote

track

in stop mode.

 

 

Clear a specific track

CHECK on the remote

 

repeatedly until the

 

number of the track to

 

be cleared lights up,

 

then press CLEAR.

 

 

Add a track to the

1 Press DISC SKIP to

program

select a CD.

 

2 Turn the jog dial to

 

select a track.

 

3 Press PLAY MODE.

 

 

Clear the entire

ponce in stop mode or

program

twice while playing.

 

 

Tips

•The program you created remains in the CD player’s memory even after it has been played. Press ·Pto play the same program again.

•If “--.--” appears instead of the total playing time while programming, this means:

–you have programmed a track numbered over 20, or

–the total playing time has exceeded 100 minutes.

22