Step 2: Hooking up the system (continued)
2Connect the FM/AM antennas.
Set up the AM loop antenna, then connect it.
Except for European models
Extend the FM wire antenna horizontally.
AM loop antenna
FM | 75 |
| |
AM |
|
For European models
Extend the FM wire antenna horizontally.
AM loop antenna
COAXIALFM 75
AM
3If your system has a VOLTAGE SELECTOR on the rear panel, set it to the position of your local power line voltage.
VOLTAGE SELECTOR
| - |
230 | 240V |
120V | 220V |
4Connect the power cord to a wall outlet.
The demonstration appears in the display.
If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter).
5Deactivate the demonstration mode by pressing DISPLAY (for LBT- W5000/W300/XB700/XB500 only) or DEMO (STANDBY) (for other models) while the system is off.
To connect optional AV components
See page 41.
6