Inserting two R6 (size AA) batteries into the remoteTips

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

When you set the time, the demonstration is deactivated.

To activate the demonstration again, press DISPLAY (for LBT-W5000/W300/XB700/XB500 only) or DEMO (STANDBY) (for other models) while the system is off.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.

When carrying this system

Do the following to protect the CD mechanism.

1Press FUNCTION repeatedly until “CD” appears in the display.

2Hold down LOOP and press 1/uto turn off the system.

Step 3: Setting the time

You must set the time before using the timer functions. The clock is on a 24-hour system for the European and Brazilian models, and a 12-hour system for other models.

The 24-hour system model is used for illustration purposes.

1

3,5

2,4

1 Press t/CLOCK SET.

The hour indication flashes.

2 Press TUNING +/– to set the hour.

3 Press ENTER/NEXT.

The minutes indication flashes.

4 Press TUNING +/– to set the minutes.

5 Press ENTER/NEXT.

The clock starts.

continued

7