Recording from the radio (continued)

Tips

When you want to record on the reverse side, press »after pressing rREC in step 5 so the indicator on the »button (for the reverse side) lights up green .

When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

To record non-preset stations, select “MANUAL” in step 2, then press TUNING +/– to tune in the desired station.

When you want to reduce the hiss noise in low- level, high-frequency signals, press DOLBY NR before step 7 so “DOLBY NR B” appears in the display.

To record with the surround effect, press DSP so

“SUR ” appears in the display.

The equalizer settings will not be recorded.

To improve broadcast reception, move the supplied antennas.

Playing a tape

You can play any type of tape, TYPE I (normal), TYPE II (CrO2), or TYPE IV (metal). The deck automatically detects the tape type. You can also use the AMS* functions to locate quickly the desired songs.

To select either deck A or B, press DECK A ȇor DECK B ȇon the remote.

* AMS: Automatic Music Sensor

1/u

3

1 VOLUME 1

(Power)

p

2

)

) 3

 

DOLBY NR 0/ p P

0/

DECK A ȇ

AMS =/+

DECK B ȇ

VOL +/–

18