Step 3: Setting the time
You must set the time before using the timer functions. The clock is on a
The
1 | 3,5 | 2,4 |
Tip
If you make a mistake, start over from step 1.
Notes
•You cannot set the time in Power Saving mode (see page 11).
•The clock setting is canceled when you disconnect the power cord or if a power failure occurs.
1 Press t/CLOCK SET.
The hour indication flashes.
2 Press TUNING +/– to set the hour.
3 Press ENTER/NEXT.
The minutes indication flashes.
4 Press TUNING +/– to set the minutes.
5 Press ENTER/NEXT.
The clock starts.
9