Step 1: Hooking up the system (continued)
3If your system has a VOLTAGE SELECTOR on the rear panel, set it to the position of your local power line voltage.
VOLTAGE SELECTOR
| - |
230 | 240V |
120V | 220V |
4Connect the power cord to a wall outlet.
The demonstration appears in the display.
If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter).
5Deactivate the demonstration mode by pressing DISPLAY (for LBT- W900AV/XB800AV only) or DEMO (STANDBY) (for other models) while the system is off.
To attach the center speaker feet
Attach the four center speaker feet (supplied) to the bottom corners of the center speaker.
To connect optional AV components
See page 44.
Inserting two R6 (size AA) batteries into the remote
]
} }
]
Tips
•With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
•When you set the time, the demonstration is deactivated.
To activate the demonstration again, press DISPLAY (for
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
When carrying this system
Do the following to protect the CD mechanism.
1Press FUNCTION repeatedly until “CD” appears in the display.
2Hold down LOOP and press 1/uto turn off the system.
6