Recording CDs by specifying the track order (continued)
8 Repeat steps 5 through 7 to program additional tracks to be recorded on side A.
Skip step 5 to select tracks from the same disc.
9 Press Pon the remote to insert a pause at the end of side A.
“P” appears in the display and the total playing time resets to “0.00” in the display.
10Repeat steps 5 through 7 to program the tracks to be recorded on side B.
Skip step 5 to select tracks from the same disc.
11Press CD SYNC.
Deck B stands by for recording, the CD player stands by for playback, and the indicator on the ábutton (for the front side) lights up green.
12Press DIRECTION repeatedly until
Aappears to record on one side or §(or RELAY) to record on both sides.
13Press P.
Recording starts.
To stop recording
Press pon deck B or on the CD player.
To check the order
Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears.
To cancel Program Edit
Press PLAY MODE repeatedly until “PROGRAM,” “ALL DISCS SHUFFLE,” or “1 DISC SHUFFLE” disappears from the display.
Selecting the tape length automatically
— Tape Select Edit
You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks.
/After inserting a CD, press EDIT once so “EDIT” flashes.
First the required tape length for the CD in the playing position appears, then the total playing time for sides A and B appears.
Note
You cannot use this function when Program Play mode has been set. After clearing the entire program, follow the above procedure (see “Clear the entire program” in the table on page 24).
28