Manuals / Brands / Home Audio / Stereo System / Sony / Home Audio / Stereo System

Sony LBT-DR8AV Specifications, Tuner, Troubleshooting (continued), Amplifier section, The tape does not erase completely, A stereo FM program cannot be received in stereo

1 56

Download 56 pages, 893.39 Kb

Troubleshooting (continued)

The tape does not erase completely.

•The record/playback heads are magnetized. Demagnetize them (see page 50).

There is excessive wow or flutter, or the sound drops out.

•The capstans or pinch rollers are dirty. Clean them (see page 50).

Noise increases or the high frequencies are missing.

•The record/playback heads are magnetized. Demagnetize them (see page 50).

Tuner

Severe hum or noise (“TUNED” or “STEREO” flashes in the display).

•Adjust the antenna.

•The signal strength is too weak. Connect an external antenna.

A stereo FM program cannot be received in stereo.

•Press STEREO/MONO so “STEREO” appears in the display.

If other problems not described above occur, reset the system as follows:

1Unplug the power cord.

2Plug the power cord back in.

3Press t/CLOCK SET, ENTER, and 1/uat the same time.

The system is reset to the factory settings. All the settings you made, such as the preset stations, clock, and timer are cleared. You should set them again.

Specifications

Amplifier section

LBT-W900AV

Front Speaker:

Continuous RMS power output (Reference) 100 + 100 watts

(8 ohms at 1 kHz, 10% THD)

Total harmonics distortion

Less than 0.07%

(8 ohms at 1 kHz, 50 W)

Center Speaker:

Continuous RMS power output (Reference) 45 watts

(8 ohms at 1 kHz, 10% THD)

Rear Speaker:

Continuous RMS power output (Reference) 40 + 40 watts

(8 ohms at 1 kHz, 10% THD)

LBT-XB800AV

Front Speaker:

DIN power output (Rated)

90 + 90 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (Reference) 120 + 120 watts

(8 ohms at 1 kHz, 10% THD)

Music power output (Reference)

200 + 200 watts

(8 ohms at 1 kHz, 10% THD)

Center Speaker:

DIN power output (Rated)

30 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (Reference) 40 watts

(8 ohms at 1 kHz, 10% THD)

Music power output (Reference) 60 watts

(8 ohms at 1 kHz, 10% THD)

Rear Speaker:

DIN power output (Rated)

15 + 15 watts

(16 ohms at 1 kHz, DIN)

Continuous RMS power output (Reference) 20 + 20 watts

(16 ohms at 1 kHz, 10% THD)

Music power output (Reference)

30 + 30 watts

(16 ohms at 1 kHz, 10% THD)

52

Contents

Page WARNING Table of Contents Getting Started Step 1: Hooking up the system 1Connecting the front speakers 2Connecting the center speaker Notes Except for European models 3Connecting the rear speakers Step 1: Hooking up the system (continued) Step 2: Setting up the speakers Positioning the center and rear speakers Step 2: Setting up the speakers (continued) Adjusting the speaker volume Step 3: Setting the time Step 4: Presetting radio stations Saving power in standby mode (For LBT-W900AV/XB800AV only) Saving power in standby mode (continued) Basic Operations Playing a CD — Normal Play Playing a CD (continued) Recording a CD — CD Synchro Recording 6 DOLBY NR 2,3 5 4 p Listening to the radio — Preset Tuning Listening to the radio (continued) Recording from the radio Recording from the radio (continued) Playing a tape To search for the beginning of a track (AMS) Recording from a tape — High-speedDubbing The CD Player Using the CD display Playing CD tracks repeatedly — Repeat Play Playing CD tracks in random order — Shuffle Play Programming CD tracks ––Program Play Programming CD tracks (continued) Playing CDs without interruption –– Non-StopPlay The Tape Deck Recording on a tape manually Recording CDs by specifying the track order — Program Edit EDIT 4,7 1 6 5 p Recording CDs by specifying the track order (continued) Selecting the tape length automatically — Tape Select Edit DJ Effects Looping part of a — Loop Flashing part of a — Flash Sound Adjustment Adjusting the sound Selecting the audio emphasis Using the Synchronized Equalizer function Selecting the audio emphasis (continued) Changing the equalizer display Adjusting the audio emphasis Adjusting the graphic equalizer Activating the surround effect Making a personal audio emphasis file — Personal File Enjoying Dolby Pro Logic Surround sound Other Features Using the Radio Data System (RDS) (For the European model only) What is the Radio Data System Receiving RDS broadcasts Locating a station by program type (PTY) To stop the search while it is in progress List of program types (PTY) NONE NEWS AFFAIRS Singing along: Karaoke Mixing and recording sounds Singing along: Karaoke (continued) Falling asleep to music — Sleep Timer Waking up to music — Daily Timer 9 DAILY 3 4,5,6,7,8 Waking up to music (continued) Timer-recordingradio programs 7 REC 2 6 3,4,5 Page Optional AV components Connecting audio components Connecting a turntable Connecting an MD deck for digital recording Connecting an MD deck for analog recording Connecting a subwoofer (LBT-DR8AV/W900AVonly) Connecting video components Connecting a TV Connecting video components (continued) Connecting a VCR Connecting a camcorder or video game Connecting a DVD player (LBT-DR8AV/W900AVonly) Connecting outdoor antennas FM antenna AM antenna Additional Information Precautions Precautions (continued) Troubleshooting General Speakers CD Player Tape Deck Troubleshooting (continued) Tuner Specifications Video section CD player section Specifications (continued) General Index