Checking the Package Contents

After opening the box, make sure that all the following items are present. Contact your dealer if anything is missing.

The Operating Instructions for this manual are provided in PDF format on the CD-ROM. After setting up the equipment as described in this manual, please read the Operating Instructions (PDF) on the CD-ROM and make necessary settings.

•LIB-D81 (1)

•Power cable (1)

•SCSI terminator (1)

•Cleaning cartridge (1)

•Quick Start Guide (1)

•CD-ROM (containing this document) (1)

Notes

•In addition to the above, other documentation and/or documents may be included in the package.

•These instructions (this Quick Start Guide) are also included in PDF format on the CD-ROM.

Installing the AIT

Autoloader

The autoloader weighs about 7 kg (15.4 lb.) and has the following dimensions. Before installing the autoloader, make sure that the surface is appropriate.

N

Note

Install the AIT autoloader on a horizontal surface near an AC power outlet. Also leave a gap of about 150 mm (5.9 in.) behind the rear of the unit to allow air to circulate.

220 mm (8.7 in.)

224 mm (8.8 in.)

(including rubber feet)

170 mm

350 mm (13.8 in.)

GB

 

(6.7 in.)

 

 

Caution

Make sure that you position the AIT autoloader as indicated in the illustration. Correct operation is not guaranteed if you place the AIT autoloader on its side.

 

 

 

50 mm (2.0 in.)

 

 

 

170 mm (6.7 in.)

Rear

 

 

 

Front

 

 

 

 

350 mm (13.8 in.)

 

150 mm

 

 

 

 

(5.9 in.)

 

 

 

50 mm (2.0 in.)

 

 

 

 

 

 

 

 

 

 

 

 

Checking the Package Contents

5