To view phone content on a TV using a HDMI cable connection
1Connect your phone to the TV set using a HDMI™ cable. 
appears in your phone's status bar after a connection is established.
2The TV launcher application starts automatically. Follow the instructions on your phone screen to view your media files on the TV.
You may need to purchase a TypeD HDMI™ cable separately. For best results, use a Sony
To view help about using the TV remote control
1Drag the status bar downwards to open the Notification panel while the HDMI™ cable is connected to both your phone and the TV set.
2Tap HDMI connected to view instructions on how to use the control buttons on your TV's remote control.
You can also press the yellow button on the TV remote control to open the Notification panel.
Compatible with BRAVIA Sync enabled devices. Limited functionality supported on most HDMI™ enabled TV’s.
To disconnect your phone from the TV set
•Disconnect the HDMI™ cable from your phone or the TV set.
Smart Connect
About Smart Connect
Use the Smart Connect application to set what happens in your device when you connect or disconnect an accessory. You can also use it to set a specific action or a group of actions to launch on your device at certain times of the day.
For example, when you connect your headset or headphones, you can set an event so that the following actions are launched on your device:
•Between 7am and 9am, when you commute to work, the WALKMAN player starts, and the web browser opens the morning paper. The ring volume is set to vibrate.
•Between office hours, a conference call app opens on your device.
•On the way back from work, the FM radio starts, and a notes app with your shopping list opens.
To start the Smart Connect application
1From your Home screen, tap 
.
2Find and tap Smart Connect.
To create a Smart Connect event
1Start the Smart Connection application. If you are opening Smart Connect for the first time, tap OK to close the introduction screen.
2On the Events tab, tap 
.
3Give the event a name, then tap Create.
4Under When, add either an accessory or a time interval, or both.
5Under Do this, add what you want to happen in your device.
6Under At the end, add what you want to happen when you disconnect the accessory or when the time interval comes to an end. If both these conditions are set, the actions start either when you disconnect the accessory, or when the time interval comes to an end.
7To save the event, press 
.
To add a Bluetooth™ accessory, you have to first pair it with your device.
102
This is an Internet version of this publication. © Print only for private use.
