Getting Started

zIf your TV or VCR has an S video input connector

Connect the component via the S VIDEO OUT connector using the S video cable (not supplied). You will get a better picture.

S video cable

YC-15V (not supplied)

TV

S VIDEO IN

VIDEO CD player

ç

SVIDEO OUT

Important

Setting the color system switch

This player conforms to the NTSC and PAL color systems. Set the COLOR SYSTEM switch on the rear of the player to the appropriate position, according to your TV.

•If the color system of your TV is NTSC:

Set the COLOR SYSTEM switch to NTSC. Pictures will not be displayed if you set the switch to PAL. When you play a VIDEO CD based on PAL system, the picture will be stretched vertically and will be displayed with the lower part of the picture cut off.

•If the color system of your TV is PAL:

Set the COLOR SYSTEM switch to PAL. Pictures will not be displayed if you set the switch to NTSC. When you play a VIDEO CD based on NTSC system, the picture will be stretched horizontally and will be displayed with the upper and lower parts of the screen masked in black.

•If your TV automatically changes the color system according to the input signal:

Of course, pictures will be displayed with the switch set to either NTSC or PAL.

But if you set the COLOR SYSTEM switch to AUTO, the player automatically changes the color system of video output according to the VIDEO CD to be played. In this case, the color system selected remains until you turn off the player, or you play another VIDEO CD with a different color system. If you turn off the player, the color system will be set to PAL automatically when you turn on the player again.

Be sure to turn off and on the player when you change the setting.

AUTONTSC PALCOLORSYSTEM

6GB