Sony MCE-K700 manual Setting the color system switch, Getting Started

Getting Started

zYou can connect video equipment (a VCR, an LD player, etc.) to this player

Connect the video equipment to the AUDIO IN and VIDEO IN jacks of the player.

You can enjoy karaoke with your video equipment (see page 25) using the karaoke functions of the player.

Actual page number:

Important

Setting the color system switch

This player conforms to the NTSC and PAL color systems. Set the COLOR SYSTEM switch on the rear of the player to the appropriate position, according

VIDEO CD player

AUDIO		VIDEO
IN	OUT
L		IN	OUT
R

VCR etc.

OUTPUT

VIDEO

L

AUDIO

R

to your TV.

∙If the color system of your TV is NTSC:

Set the COLOR SYSTEM switch to NTSC. Pictures will not be displayed if you set the switch to PAL. When you play a VIDEO CD recorded in the PAL color system, the picture will be stretched vertically and will be displayed with the upper and lower parts of the picture cut off.

∙If the color system of your TV is PAL:

Set the COLOR SYSTEM switch to PAL. Pictures will not be displayed if you set the switch to NTSC. When you play a VIDEO CD recorded in the NTSC color system, the picture will be stretched horizontally and will be displayed with the upper and lower parts of the screen masked in black.

∙If your TV automatically changes the color system according to the input signal:

Pictures will be displayed with the switch set to either NTSC or PAL.

If you set the COLOR SYSTEM switch to AUTO, the player automatically changes the color system of video output according to the color system of the VIDEO CD to be played. In this case, the color system selected remains until you turn off the player, or you play another VIDEO CD with a different color system. If you turn off the player, the color system will be set to NTSC automatically when you turn on the player again.

∙If you connect the video equipment to this player:

Set the COLOR SYSTEM switch to NTSC or PAL according to your video equipment.

If you set the COLOR SYSTEM switch to AUTO, the on-screen display of the player may not be displayed properly depending on discs or tapes.

Be sure to turn off and on the player when you change the setting.

COLOR SYSTEM

AUTO

NTSC PAL

,

6EN

SONY MCE-K700 (E, C1, C2) 3-859-191-11(1)