Replacing the ear pads

When the ear pads become dirty or damaged, you can get replacements from your Sony dealer. Replace them as illustrated below.

1 Remove the old ear pad by pulling it out of the groove on the housing.

2 Place the new ear pad on the driver unit and insert the edge of the pad into the groove as illustrated.

Make sure that the entire edge of the ear pad is securely inserted into the groove.

(Additional information

Precautions

•When the headphones are not to be used for a long period of time, remove the batteries to avoid damage caused by battery leakage and subsequent corrosion.

•When the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the AC outlet holding the plug. Do not pull on the cord.

Also remove the batteries to avoid damage caused by battery leakage and subsequent corrosion.

•Do not leave the wireless stereo headphone system in a location subject to direct sunlight, heat or moisture.

Notes on headphonesPreventing hearing damage

Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

Caring for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you.

If you have any questions or problems concerning the system that are not covered in this manual, please consult the nearest Sony dealer.

Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work.

11