48
Editing Recorded MDs
Copying names (Name Copy)
You can copy track or disc names to other tracks within the
disc.
1Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until
“Name?” appears in the display; press AMS or YES.
3Turn AMS (or press ./> repeatedly) until “Nm
Copy?” appears in the display; press AMS or YES.
4Turn AMS (or press ./> repeatedly) until the
track name (when copying the track name) or “Disc”
(when copying the disc name) flashes in the display;
press AMS or YES.
When “No Name” is displayed
The selected track or disc has no name.
5Turn AMS (or press ./> repeatedly) until to
the track number to be copied to (when naming a
track) or “Disc” (when naming a disc) flashes in the
display; press AMS or YES.
“Complete!” appears for a few seconds, and copying is
complete.
To cancel the operation
Press MENU/NO or x.
zWhen “Overwrite??” appears in step 5
A track name or disc name has already existed to the
target track. If you still want to copy the name, press
AMS or YES again while the indication is displayed.
Note
When a track name of a track recorded in MDLP (LP2 or
LP4) is copied onto a track recorded in stereo or monaural,
the “LP:” stamp indicating an MDLP recording is copied to
the beginning of the track and displayed.
Copying the same name to all tracks and
disc. (Name All Copy)
You can copy the same name simultaneously to all tracks
and disc on the MD.
1Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
2Turn AMS until “Name?” appears in the display;
press AMS or YES.
3Turn AMS (or press ./> repeatedly) until “NM
All Copy?” appears, then press AMS or YES.
4Turn AMS (or press ./> repeatedly) until the
track name (when copying the track name) or “Disc”
(when copying the disc name) flashes in the display;
press AMS or YES.
When “No Name” is displayed
The selected track or disc has no name, and copying
cannot be completed. “Empty Name” will be
displayed.
5Turn AMS (or press ./> repeatedly) until the
correct selection (below) appears; press AMS or
YES.
Name Selection
Only the section without a name Copy Only
(No Name) is copied No Name ?
All names are to be overwritten Copy All
Overwrite?
“Complete!” appears for a few seconds, and copying is
complete.
To cancel the operation
Press MENU/NO or x.
Note
• Copying of all names cannot use the “Undo?” function,
so make sure to be careful before completing the
copying.
• When a track name of a track recorded in MDLP (LP2 or
LP4) is copied onto a track recorded in stereo or
monaural, the “LP:” stamp indicating an MDLP
recording is copied to the beginning of the track and
displayed.
Adding date and time to the name of
recorded tracks (Auto Calender)
The internal clock in the recorder allows you to
automatically add the time and date to the name of tracks.
1Press MENU/NO twice while the recorder is stopped
“Setup Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until
“A.Calendar?” appears in the display; press AMS or
YES.
3Turn AMS (or press ./> repeatedly) until the
correct selection (below) appears; press AMS or
YES.
Date and time is to be added Selection
to tracks
Yes On
No Off
4Press MENU/NO.
Note
When adding the name of a track recorded by Auto
Calendar, be would not record the “LP:” stamp indicating
an MDLP recording.