Tracks created by editing may exhibit sound dropouts as you’re searching for a point while monitoring the sound.

Some tracks cannot be combined with others

Tracks may not be combined if they have been edited.

Track numbers are not marked correctly

Incorrect assignment or marking of track numbers may result when CD tracks are divided into several smaller tracks during digital recording. Depending on the material recorded, when “Track Mark” of the Setup Menu was set to “Level Sync” and the track number automatically assigned during recording, the track number may not have been accurately assigned.

“TOC Reading” appears for a long time

If the inserted recordable MD is brand new, “TOC Reading” will appear in the display for a longer period than for already-used MDs.

The correct recorded/playing time may not be displayed during playback of MDs recorded in monaural mode.

Guide to the Serial Copy Management

System

Digital audio components, such as CDs, MDs, and DATs, make it easy to produce high-quality copies of music by processing music as a digital signal.

To protect copyrighted music sources, this recorder uses the Serial Copy Management System, which allows you to make only a single copy of a digitally recorded source through digital-to-digital connections.

You can make only a first-generation copy1) through a digital-to-digital connection.

Examples are as follows:

•You can make a copy of a commercially available digital sound program (for example, a CD or MD), but you cannot make a second copy from the first-generation copy.

•You can make a copy of a digital signal from a digitally recorded analog sound program (for example, an analog record or a music cassette tape) or from a digital satellite broadcast program, but you cannot make a secons copy from the first-generation copy.

1)A first-genaration copy means the first recording of a digital audio source through the recorder’s digital input connector. For example, if you record from a CD player connected to the DIGITAL IN connector, that copy is a first-generation copy.

Notes

The restrictions of the Serial Copy Management System do not apply when you make a recording through the analog-to analog connections.

Trouble shooting

Should you have trouble with your MD recorder, first unplug the unit, then plug it back in and check It while using this troubleshooting guide. Should the problem persist, consult your nearest Sony dealer.

The recorder does not operate or operates poorly

/The MD may be dirty or damaged. Replace the MD.

The recorder does not play

/Moisture has formed inside the recorder/ Take the MD out and leave the recorder in a warm place for several hours until the moisture evaporates.

/Be sure that the power is on.

/The recorder may not be correctly connected to the amplifier. Check the connection.

/The MD is inserted in the wrong direction. Slide the MD into the disc slot with the label side up and the arrow pointing toward the slot.

/The MD may not be recorded. Replace the disc with one that has been recorded.

The sound has a lot of static

/Move the recorder away from sources of strong magnetism, such as televisions.

The recorder does not record

/THe MD is record-protected. Slide the record- protect tab to close the slot.

/The recorder is not connected properly to the program source. Check the connection.

/Select the correct program source using INPUT.

/The recording level is not adjusted properly. Adjust the recording level.

/A premastered MD is inserted. Replace it with a recordable MD.

/There is not enough time left on the MD. Replace it with another recordable MD with fewer recorded tracks, or erase unnecessary tracks.

/There has been a power failure, or the AC power cord has been disconnected during recording. Data recorded to that point may be lost. Repeat the recording procedure.

The recorder does not perform synchro recording with a CD player

/The remote supplied with the MD recorder is not set correctly. Reset the remote.

The keyboard does note operate

/Disconnect the keyboard, turn off power to the recorder, and reconnect the keyboard.

The recorder begins playback or recording when the power is turned on

/“Timer” of the Setup Menu is set to “Play” or “Rec.” Set “Timer” to “Off.”

Although neither play or recording are set, there is still output from the recorder

/“Relay” of the Setup Menu is set to “Play” or “Rec.” Set “Relay” to “Off”.

When the suggested measures above do not solve the problem, remove the power plug, then plug it back in again.

65

Additional Information

Page 64 Page 66
Page 65
Image 65
Sony MDS-E12 operating instructions Trouble shooting, Guide to the Serial Copy Management System
Page 64 Page 66

MDS-E12 specifications

The Sony MDS-E12 is a notable addition to the Minidisc player lineup, reflecting Sony's commitment to innovation in the digital audio realm. Released in the late 1990s, this device was designed with a focus on high-quality audio playback and recording, making it a preferred choice for audiophiles and professionals alike.

One of the standout features of the MDS-E12 is its playback precision. Utilizing Sony's proprietary ATRAC (Adaptive TRansform Acoustic Coding) technology, the device processes audio with remarkable fidelity. ATRAC allows for efficient compression of audio files while maintaining impressive sound quality, making the MDS-E12 suitable for both casual listeners and serious music enthusiasts who demand clarity and rich soundscapes from their recordings.

In addition to its playback capabilities, the MDS-E12 also offers seamless recording features. Users can record live audio directly onto the Minidisc, capturing concerts, lectures, or personal performances with ease. The device supports both digital and analog input, allowing for versatile recording options from various audio sources. The built-in microphone input ensures that spontaneous recording is always an option.

Another highlight of the MDS-E12 is its user-friendly interface. The device includes a well-designed LCD display that provides essential information such as track numbers, play time, and remaining recording capacity. The intuitive layout of controls ensures that users can navigate easily through menus and settings, enhancing the overall user experience.

Moreover, the MDS-E12 incorporates a range of playback options. Users can enjoy repeat play, shuffle mode, and program play to customize their listening experience. The ability to label tracks enhances organization, allowing users to manage their collections effectively.

The Sony MDS-E12 is also built with durability in mind. Its robust design can withstand the rigors of daily use, catering to both home listeners and those on the go. The compact size of the device makes it portable, which is ideal for users who appreciate the flexibility of enjoying their audio on various occasions.

In terms of connectivity, the MDS-E12 features optical and coaxial digital outputs, as well as a headphone jack, making it straightforward to integrate with other audio equipment. Its performance, combined with comprehensive features and great sound quality, solidifies the Sony MDS-E12's place in the digital audio history, representing an era where Minidisc technology provided a fresh alternative to cassette tapes and CDs.
Top Page Image Contents