To connect the mains lead

Connect the mains lead of the deck to mains.

Notes

•If you use a timer, connect the mains lead to the socket of the timer.

•Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

Inserting batteries into the remote

Insert two R6 (size-AA) batteries into the battery compartment with the + and – properly oriented to the markings. When using the

remote, point it at the remote sensor on the deck.

Tip

When the remote no longer operates the deck, replace both batteries with new ones.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not use a new battery with an old one.

•Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Connecting a personal computer to the deck (Net MD)

By installing the supplied software OpenMG Jukebox onto your computer, you can transfer digital music contents saved on the hard disc of your computer to (Check Out) and from (Check In) an MD. For details on the installation and operation of OpenMG Jukebox, refer to the instruction manual or the online help for OpenMG Jukebox.

Be sure to install the OpenMG Jukebox software to your computer before you connect the MD deck and your computer.

1 2

Computer

Required cord

USB cable (supplied)

8GB