C14/TOC Error
•The deck could not read the TOC on the MD properly.
,Insert another disc.
,If possible, erase all the tracks on the MD (page 27).
C41/Cannot Copy
•The sound source is a copy of commercially available music software, or you tried to record a
,The Serial Copy Management System prevents making a digital copy (page 48). You cannot record a
C71/Din Unlock
•The sporadic appearance of this message is caused by the digital signal being recorded. This will not affect the recording.
•While recording from a digital component, the digital connecting cable may have been incompletely connected and come loose or the digital component was turned off.
,Check the connection or turn the digital component back on.
E0001/MEMORY NG
•There is an error in the internal data that the deck needs in order to operate.
, Consult your nearest Sony dealer.
E0101/LASER NG
•There is a problem with the optical pickup.
,The optical pickup may have failed. Consult your nearest Sony dealer.
E0201/LOADING NG
•There is a problem with the loading.
,The loading may have failed. Consult your nearest Sony dealer.
Display messages
The following table explains the various messages that appear in the display. Messages are also displayed by the deck’s
Auto Cut
The Auto Cut Function is on (page 15).
Blank Disc
A new (blank) or erased MD has been inserted.
Busy NOW!
You pressed NET MD during Check In or Check Out. Wait until the operation is completed.
Cannot Edit
An attempt was made to edit the MD during Programme or Shuffle Play or to change the recording level of an MD recorded in LP2 or LP4 Stereo mode.
Check USB
The USB cable is not connected properly. Check the connection.
CONNECT
Check In or Check Out is underway. (If you attempt an invalid operation at this time, “CONNECT!” appears.)
Disc Full!
The MD is full (page 47).
Group Full!
An attempt was made to create a new group in excess of the maximum number of groups, or there are insufficient characters for updating the group management information.
Impossible
The deck cannot do the recording or editing operation (page 28 and page 30).