3 Enter a character using letter/number buttons.
If you have selected upper cases or lower cases
1Press the corresponding letter/number button repeatedly until the character to be entered flashes.
Or, press the button once and press
./> repeatedly.
To select symbols, press . repeatedly while “A” is flashing.
2Press M.
The flashing character is entered and lights continuously and the cursor shifts to the right.
If you have selected numbers
Press the corresponding number button. The number is entered and the cursor shifts to the right.
4 Repeat steps 2 and 3 to enter the rest of the name.
To change a character
Press m/M repeatedly until the character to be changed flashes, press CLEAR to erase the character, then repeat steps 2 and 3.
5 Press YES.
The whole name appears in the display, followed by “Complete!.”
Renaming a track or an MD
1 Press NAME EDIT/SELECT on the remote depending on what you want to rename:
To rename | Press while |
A track | The track number is displayed |
|
|
The MD | The deck is stopped with total |
| number of tracks (or groups when |
| the Group function is on) |
| displayed |
|
|
A track or disc name appears in the display.
2 Press CLEAR until the selected name is erased completely.
3 Do steps 4 to 7 of “Naming a track or an MD using the controls on the deck” on page 32 or steps 2 to 4 of “Naming a track or an MD using the remote” on page 32.
4 Press YES.
The whole name appears in the display, followed by “Complete!.”
Erasing a track or disc name
Use this function to erase the name of a track or disc.
1 While the deck is stopped, playing, recording, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until “Nm Erase?” appears, then press AMS or YES.
3 Turn AMS (or press ./> repeatedly) until the number of the track (when erasing the track name) or “Disc” (when erasing the disc name) flashes, then press AMS or YES.
“Complete!” appears.
MDs Recorded Editing