Dividing Tracks (continued)
4 While monitoring the sound, press
./> repeatedly (or turn ./
>on the deck) to locate the dividing point.
You can shift point A one frame at a time.* The time indication (“ m,” “ s ,” and “ f ” ) of the current point is displayed and several seconds of the track from that point play back repeatedly.
*Or 2 frames in LP2 stereo mode, or 4 frames in LP4 stereo mode.
To find a point quickly
Specify a unit (minute, second, or frame) by which the MD is advanced when you press
./> repeatedly (or turn ./> on the deck).
To do this, press m/M in step 4 repeatedly to select “ m,” “ s,” or “ f.” The selected unit flashes in the display.
5 Repeat step 4 until you’ve located the dividing point.
6 Press YES (or ./> on the deck).
“Complete!!” appears for a few seconds and the track is divided. The deck starts to play the newly created track. Note that new track has no name.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
zYou can undo the track division
For details, see “ Undoing the Last Edit” on page 38.
zYou can divide tracks while recording
For details, see “ Marking Track Numbers While Recording” on page 18.
32