7 Press YES (or ./> on the deck).
The deck starts recording over the specified portion of the original track. “ S.F Edit: XX%” appears to show the recording progress while the portion is being recorded over. When the process finishes,
“Complete!!” appears in the display for a few seconds.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck) in steps 1 to 6 above. After you press YES (or
./> on the deck) in step 7, you can’t cancel the operation.
Notes
•Do not disconnect the AC power adaptor or move the deck while the recording is in progress. This may damage the recording data preventing recording from being performed properly.
•You can’t change the level of tracks recorded in LP2 or LP4 mode.
•Do not use an MD that is damaged or dirty. This may prevent the track from being recorded properly.
•Repeated changes of the track level using the S.F Edit function results in poor sound quality.
•Once the track level has been changed, the track level will not return to the exact original level, even if you attempt to return it by performing the S.F Edit function again. Note also that you cannot undo the S.F Edit function.
Recorded Editing MDs
41