3 Press YES (or ./> on the deck).
One of the following messages appears depending on the last edit operation.
Last edit operation | Message | |
Erasing a track |
| |
|
| |
Erasing all the tracks on | Erase Undo? | |
an MD | ||
| ||
|
| |
Erasing a portion of a track |
| |
|
| |
Dividing a track | Divide Undo? | |
|
| |
Combining tracks | CombineUndo? | |
|
| |
Moving a track | Move Undo? | |
|
| |
Naming a track or MD |
| |
|
| |
Copying a track or disc name |
| |
|
| |
Renaming a track or MD | Name Undo? | |
|
| |
Erasing a track or disc name |
| |
|
| |
Erasing all the names on the |
| |
MD |
| |
|
|
4 Press YES (or ./> on the deck).
“Complete!!” appears for a few seconds and the MD is restored to the condition that existed before the edit operation.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
Changing the Track Level After Recording
(S.F Edit)
You can change the volume of recorded tracks using S.F (Scale Factor) Edit. The original track is recorded over at the new recording level. When changing the recording level, you can change the overall level, gradually increase the signal level at the start of the track, or gradually decrease the level at the end of the track.
?/1
Z
N X x
./> | . > z |
| m M |
MENU/NO | + |
| YES |
| – |
| g |
Changing the overall level of a
track
1 While the deck is stopped, playing, or paused, press MENU/NO.
“ Edit Menu” appears in the display.
2 Press ./> repeatedly (or turn
./> on the deck) until “ S.F Edit ?” appears, then press YES (or ./
>on the deck).
3 Press ./> repeatedly (or turn
./> on the deck) until “ Tr Level ?” appears, then press YES (or ./
>on the deck).
continued
Recorded Editing MDs
39