Recording on MDs
Synchro-Recording with Audio Equipment of Your Choice Z
By using the MUSIC SYNC button on the remote, you can automatically start recording in sync with the signal input from the program source through the LINE (ANALOG) IN jacks or the respective digital input connector (Music
The method of marking track numbers differs, depending on the program source being recorded and how the deck is connected to the program source. (See “Notes on Recording” on page 9.)
6
·P p
=+ r
0) MUSIC SYNC
1Do Steps 1 to 5 in “Recording on an MD” on page 6.
2Press MUSIC SYNC.
The deck changes to recording pause.
3Start playing the program source you want to record.
The deck starts recording automatically.
To stop Music
Press p.
Note
When Music
Synchro-Recording with a Sony CD Player Z
By connecting your deck to a Sony CD player or
As the same remote controls both the CD player and the deck, you may have trouble operating both units if they are far from each other. If you do, place the CD player close to this deck.
6
STANDBY |
| · | P p |
|
| ||
START | = | + | r |
0 | ) |
| |
|
| ||
STOP |
|
|
|
CD PLAYER P | P | = + |
|
|
|
|
1Set the source selector on the amplifier to CD.
2Do Steps 2 to 5 in “Recording on an MD” on page 6 to prepare the deck for recording.
3Insert a CD into the CD player.
4Select the playback mode (Shuffle Play, Program Play, etc.) on the CD player.