SECTION 1
GENERAL
Location of controls
DI SC + | - | PTY | OPEN |
DSPL | |||
| P |
|
|
| R |
|
|
| S |
|
|
| T |
|
|
MENU | + | LIST | |
|
TA
SOURCE 
AF
SOUND |
|
|
|
| ENTER |
|
|
|
|
|
|
| P |
|
|
|
| REP | SHUF |
|
|
|
|
| R |
|
|
|
|
|
|
|
| ||
| S |
|
|
|
|
|
|
|
|
|
|
| T |
| S |
|
|
|
|
|
|
|
|
OFF | - | D I | C– | MODE | 1 | 2 | 3 | 4 | 5 | 6 | |
- |
|
This section is extracted from instruction manual.
Setting the clock
The clock uses a
Example: To set the clock to 10:08
1 Press (MENU), then press either side of (DISC/PRST) repeatedly until “CLOCK” appears.
1Press (ENTER).
The hour indication flashes.
Refer to the pages listed for details.
1Volume control dial 19
2MENU button 8, 10, 12, 13, 14, 15, 16, 18, 19, 21, 24
3DISC/PRST +/– (cursor up/down) buttons 8, 10, 12, 13, 14, 15, 16, 18, 19, 20, 21, 24
During CD/MD playback: Disc change 10, 13
During radio reception: Preset stations select 16
4Z (eject) button (located on the front side of the unit behind the front panel) 9
5DSPL/PTY (display mode change/ programme type) button 9, 10, 12, 17, 20
6LIST button 12
7SOURCE (TUNER/CD/MD) button 8, 9, 10, 13, 15, 16, 19
8Display window
9OPEN button 7, 9, 26
q;
qs Reset button (located on the front side of the unit behind the front panel) 7
qd OFF button* 7, 8, 9
qf SEEK/AMS
Automatic Music Sensor 10, 14
Manual Search 10
Seek 15, 16, 18
qg ENTER button 8, 10, 12, 13, 14, 15, 16, 18, 19, 20, 21, 24
qh MODE button 19 During CD or MD playback:
CD/MD unit select 9, 13 During radio reception:
BAND select 15, 16
qj Receptor for the card remote commander
qk Number buttons
During radio reception:
Preset number select 15, 16, 18, 19 During CD/MD playback:
(1)REP 11
(2)SHUF 11
ql AF button 17, 18, 19 w; TA button 18, 19
*Warning when installing in a car without ACC (accessory) position on the ignition key switch
Be sure to press (OFF) on the unit for two seconds to turn off the clock display after turning off the engine.
When you press (OFF) only momentarily, the clock display does not turn off and this causes battery wear.
2Press either side of (DISC/PRST) to set the hour.
3Press the (+) side of (SEEK/AMS).
The minute indication flashes.
4Press either side of (DISC/PRST) to set the minute.
2 Press (ENTER).
The clock starts.
After the clock setting is completed, the display returns to normal play mode.
Tip
You can set the clock automatically with the RDS feature (see page 17).
Note
In the initial setting, the clock indication appears while the unit is turned off.
When the D.INFO mode is set to ON, the time is always displayed (page 24).
3
