Displaying the station name
Press (DSPL) during radio reception.
Each time you press (DSPL), the item changes as follows:
z Station name*1 z Frequency z Clock
MOTION DISPLAY*2 Ò
*1 If the station name of a station is not stored, “NO Name” appears in the display for one second.
*2 All the items above are scrolled in the display one by one in order.
Erasing the station name
1 Tune in any station and press (LIST) for two seconds.
2 Press (DSPL) for two seconds.
3 Rotate the dial to select the name that you want to erase.
4 Press (5) (ENTER) for two seconds. The name is erased.
Repeat steps 3 and 4 if you want to erase other names.
5 Press (LIST) for two seconds.
The unit returns to the normal radio reception mode.
Locating a station by
name —
1 Press (LIST) momentarily.
The name assigned to the station currently playing appears in the display.
ENTER
2 Press (LIST) repeatedly until you find the desired station.
3 Press (5) (ENTER) to tune in the desired station.
Note
Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. To turn off the display, press (DSPL).
Other Functions
Using the rotary commander
The rotary commander works by pressing buttons and/or rotating controls.
You can control the optional CD or MD unit with the rotary commander.
By pressing the button (the
SOURCE and MODE buttons)
(SOURCE)
EN
(MODE) | Radio/Other | |
Every time you press (SOURCE), the | ||
Functions | ||
source changes as follows: | ||
| ||
Tuner nCD nMD |
| |
Pressing (MODE) changes the operation |
| |
in the following ways: |
|
•Tuner : FM1 nFM2 nAM
•CD unit: CD1 nCD2 n…
•MD unit : MD1 nMD2 n…
Tip
When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.
By rotating the control (the SEEK/ AMS control)
continue to next page n
11