Locating a disc by name

—List-up (CD unit with custom file function or MD unit)

You can use this function with discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD.” (page 16)

1 Press (LIST) momentarily.

The name assigned to the disc currently playing appears in the display.

DISC

ENTER

2 Press (LIST) repeatedly until you find the desired disc.

3 Press (5) (ENTER) to play back the disc.

Notes

•Once a disc name has been displayed for five seconds, the display goes back to its normal playback mode. To turn off the display, press

(DSPL).

•The track names are not displayed during MD or CD TEXT disc playback.

•If there are no discs in the magazine, “NO Disc” appears in the display.

•If a disc has not been assigned a custom file, “********” appears in the display.

•If the disc information has not been read by the unit, “?” appears in the display. To load the disc, first press the number button, then choose the disc that has not been loaded.

•The information appears only in upper case. There are also some letters which cannot be displayed (during MD playback).

Selecting specific tracks for playback

— Bank (CD unit with custom file function)

If you label the disc, you can set the unit to skip tracks and play only the tracks you want.

1 Start playing the disc and press (SHIFT).

Then press (3) (PLAY MODE) for two seconds.

Bank edit mode

DISC TRACK

PLAY MODE

ENTER

Note

If you have not labeled the disc, the bank edit mode does not appear. To go back to the normal playback mode, press (SHIFT).

2 Push the (SEEK/AMS) control up or down to select the track number you want to skip and press (5) (ENTER).

DISC TRACK

PLAY MODE

ENTER

The indication changes from “Play” to “Skip”. If you want to return to “Play,” press (5) (ENTER) again.

3 Repeat step 2 to set the “Play” or “Skip” mode on all the tracks.

4 Press (3) (PLAY MODE) for two seconds. The unit returns to the normal CD playback mode.

5 Press (SHIFT).

Notes

•You can set the “Play” and “Skip” mode on up to 24 tracks.

•You cannot set the “Skip” mode on all the tracks.

Playing the specified tracks only

You can select:

•Bank on to play the tracks with the “Play” setting.

•Bank inv (Inverse) to play the tracks with the “Skip” setting.

1 During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “Bank” appears.

2 Press (4) (n) repeatedly until the desired setting appears.

z Bank on z Bank inv z Bank off

BANK

PLAY MODE

Playback starts from the track following the current one.

3 Press (SHIFT).

To go back to the normal playback mode, select “Bank off” in step 2 above.

EN

Unit CD/MD

17