19

Receiving traffic

announcements

— TA/TP
By activating the Traffic Announcement (TA)
and Traffic Programme (TP), you can
automatically tune in an FM station broadcasting
traffic announcements. These settings function
regardless of the current FM programme/source,
CD/MD; the unit switches back to the original
source when the bulletin is over.
Press (TA) repeatedly until “TA on”
appears.
The unit starts searching for traffic
information stations.
“TP” indicates reception of such stations, and
“TA” flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
“NO TP” is indicated.
To cancel all traffic announcements, select
“TA off.”
Tip
You can also cancel the current announcement by
pressing (SOURCE) or (MODE).

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic
announcements so you won’t miss hearing them.
1Press (VOL) to adjust the desired
volume level.
2Press (TA) for 2 seconds.
“TA” appears and the setting is stored.

Receiving emergency announcements

If either AF or TA is on, the unit will switch to
emergency announcements, if one comes in
while listening to an FM station or CD/MD.

Presetting RDS stations with

AF and TA setting

When you preset RDS stations, the unit stores
each station’s AF/TA setting (on/off) as well as
its frequency. You can select a different setting
(for AF, TA, or both) for individual preset
stations, or the same setting for all preset
stations. If you preset stations with “AF on,” the
unit automatically stores stations with the
strongest radio signal.

Presetting the same setting for all

preset stations

1Select an FM band (page 15).
2Press (AF) and/or (TA) to select
“AF on” and/or “TA on.”
Note that selecting “AF off” or “TA off”
stores not only RDS stations, but also non-
RDS stations.
3Press (MENU), then press M or m
repeatedly until “BTM” appears.
4Press (ENTER) until “BTM” flashes.

Presetting different settings for each

preset station

1Select an FM band, and tune in the
desired station (page 16).
2Press (AF) and/or (TA) to select
“AF on” and/or “TA on.”
3Press the desired number button ((1)
to (6)) until “MEM” appears.
Repeat from step 1 to preset other stations.
To Press
Cancel current
announcement (TA)