9

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button on the front panel with a
pointed object, such as a ballpoint pen.
Notes
After resetting the unit in the closed position, be sure
to press (OPEN) once before operating further. If a
disc is in the unit, the disc will be ejected
automatically. Insert the disc again.
Pressing the reset button will erase the clock setting
and some stored contents.
Resetting the unit during use in sub-
display position
Press the reset button by the disc-slot w i th a
pointed object, such as a ballpoint pen.

Detaching the main display

window

You can detach the main display window of this
unit to protect the unit from being stolen.
Caution alarm
If you turn the ignition switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds.
1Press (OPEN) on the unit for 2
seconds.
CD/MD playback or radio reception stops,
and the front panel automatically tilts at an
angle of 30°.
2Detach the main display window as
illustrated.
After the main display window detaching is
complete, the front panel closes
automatically.
Notes
If you detach the main display window while the unit
is still turned on, the power will turn off automatically
to prevent the speakers from being damaged.
Do not drop or put excessive pressure on the display
window.
Do not subject the main display window to heat/high
temperature or moisture. Avoid leaving it in parked
cars or on dashboards/rear trays.
Tips
If you want to detach the main display window, when
the front panel is in the sub-display position, press
(CLOSE) for 2 seconds.If a disc is partially inserted,
load the disc correcty or remove the disc from the
unit.
When carrying the main display window with you,
use the supplied front panel case.
Reset button
Reset button
continue to next page t
(OPEN)