xAutomatic picture quality adjustment function (for PC 2 only)

When the display receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 36).

If the automatic picture quality adjustment function of this display seems to not completely adjust the picture

You can make further automatic adjustment of the picture quality for the current input signal (See “Auto Adjust” below).

If you still need to make further adjustments to the picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).

These adjustments are stored in memory and automatically recalled when the display receives a previously input and registered input signal.

xMaking further automatic adjustments to the picture quality for the current input signal (Auto Adjust) (for PC 2 only)

1Press the MENU button.

The main menu appears on the screen.

2Press the M/m buttons to select (Screen) and press the OK button.

The “Screen” menu appears on the screen.

3Press the M/m buttons to select “Auto Adjust” and press the OK button.

Make the appropriate adjustments of the screen’s phase, pitch and horizontal/vertical position for the current input signal and store them.

4Press the M/m buttons to select the desired mode and press the OK button.

•OK: To start adjusting.

•Cancel: To cancel adjustments.

xAdjusting the picture’s sharpness manually (Phase/Pitch) (for PC 2 only)

You can adjust the picture’s sharpness as follows.

1Set the resolution to 1,680 × 1,050 on the computer.

2Load the CD-ROM.

3Start the CD-ROM and display the test pattern.

For Windows User When Auto run operates:

1 Click Display Adjustment tool (Utility).

2 Click “Adjust” and confirm the resolution and then click “Next.”

Test pattern for Pitch and Phase appears in order.

When Auto run fails to operate:

1Open “My Computer” and right click the CD-ROM icon. Go to “Explorer” and open the CD-ROM icon.

2Open [Utility] and then select [Windows].

3 Start [Win_Utility.exe]. Test pattern appears.

For Macintosh user

1Open [Utility] and then select [Mac].

2 Start [Mac_Utility.exe]. Test pattern appears.

4Press the MENU button.

The main menu appears on the screen.

5Press the M/m buttons to select (Screen) and press the OK button.

The “Screen” menu appears on the screen.

6Press the M/m buttons to select “Phase” and press the OK button.

The “Phase” adjustment menu appears on the screen.

7Press the M/m buttons until the horizontal stripes are at a minimum.

Adjust so that the horizontal stripes are at a minimum.

8Press the OK button.

The main menu appears on the screen.

If vertical stripes are observed over the entire screen, adjust the pitch using the following procedures.

9Press the M/m buttons to select “Pitch” and press the OK button.

The “Pitch” adjustment menu appears on the screen.

10Press the M/m buttons until the vertical stripes disappear.

Adjust so that the vertical stripes disappear.

11 Click [END] on the screen to turn off the test pattern.

24