Recording a CD
— CD Synchro Recording
The CD SYNC
| DISC SKIP |
| |
?/1 | hH 3 5 |
(Power) |
p2 6 4 1
1Press A and insert a recordable tape into deck B.
With the side you want to record facing forward
2 Press CD.
3 Press Z OPEN/CLOSE and place a CD.
Then press Z OPEN/CLOSE again to close the disc tray.
When the CD you want to record is not selected, press DISC SKIP
Place with the label side up. When you play a CD single (8 cm CD), place it on the inner circle of the tray.
4 Press CD SYNC
Deck B stands by for recording and the CD player stands by for playback. The indicator on REC PAUSE/START flashes.
5 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides.
6 Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tips
•If you want to record from the reverse side, press TAPE A/B repeatedly to select deck B after step 1. Press hH to start playback of the reverse side, then press x where you want to start recording. The reverse indicator of deck B lights (see page 16).
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
Note
You cannot listen to other sources while recording.
12