Connecting an MD deck for listening to music
Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press MD (VIDEO).
To the audio output of the
MD deck
Tip
When you connect a Sony MD deck, you can use the MD H, S, and s buttons on this unit’s remote to perform play, pause, and stop operations.
Note
If you cannot select “MD” when you press MD (VIDEO), press ?/1 while pressing MD (VIDEO) when the power is turned off. “VIDEO” will be switched to “MD”. To return to “VIDEO”, do the same procedure. However, you cannot switch from MD to VIDEO or from VIDEO to MD when the system is in the Power Saving Mode (see page 9).
Connecting a VCR
By connecting the audio output jacks of your VCR to the MD/VIDEO (AUDIO) IN jacks using an optional audio cable, you can enjoy video playback in powerful stereo sound.
Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected VCR, hold down MD (VIDEO) and press ?/1 when the power is turned off. This switches the “MD” function to “VIDEO”. Once you enable the “VIDEO” function, just press MD (VIDEO).
To the audio output of the video deck
Notes
•You cannot switch from MD to VIDEO or from VIDEO to MD when the system is in the Power Saving Mode (see page 9).
•To return to “MD”, press ?/1 while pressing MD (VIDEO) again when the power is turned off.
•When you connect a VIDEO CD deck, set to “MD”.
39