Timer-recording radio programs (continued)

4 Set the time to start recording.

Press l or L repeatedly to set the hour, then press ENTER.

The minute indication starts flashing.

REC

Press l or L repeatedly to set the minute, then press ENTER.

The hour indication flashes again.

5 Set the time to stop recording following the above procedure.

The start time, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”) appear, then the original display appears.

6 Insert a recordable tape.

7 Turn off the power.

When the recording starts, the volume level is set to the minimum.

To check the setting

Press CLOCK/TIMER SELECT and press

lor L repeatedly to select “REC”, then press ENTER.

To change the setting, start over from step 1.

To cancel the timer operation

Press CLOCK/TIMER SELECT and press

lor L repeatedly to select “TIMER OFF”, then press ENTER.

Notes

•If the power is on at the preset time, the recording will not be made.

•You cannot set the timer if the starting time and stopping time are the same.

•When you use the Sleep Timer, Timer-recording will not turn on the system until the Sleep Timer turns it off.

•You cannot activate Timer-recording and Daily

38

Timer at the same time.

Optional components

Connecting audio components

Select one of the following connections, depending on the component to be connected and method of connecting. Refer to the instructions of each component.

Connecting an MD deck for digital recording

You can record from CD into the MD deck digitally by connecting an optional optical cable.

To the digital input jack of the MD deck