Programming the CD tracks
–– Program Play
You can make a program of up to 32 tracks from all the CDs in the order you want them to be played.
?/1 | 4 p 7 | 4 | 2 | |
(Power) | ||||
|
|
|
1 Press CD, then place a CD.
2 Press PLAY MODE repeatedly until “PGM” appears in the display.
3 Press one of the DISC 1~3 buttons to select a CD.
To program all the tracks on a CD at once, proceed to step 5 while “AL” appears in the display.
4 Press . or > until the desired track appears in the display.
Total playing time
Disc number (including selected track)
3 1 5
|
| hH |
hH | S s | s |
l | L | l L |
jJ
H S | s | CD |
CHECK
CLEAR
PGM
Track number
5 Press ENTER.
The track is programmed. The program step number appears, followed by the total playing time.
6 To program additional tracks, repeat steps 3 to 5.
Skip step 3 to select tracks from the same disc.
7 Press hH.
All the tracks play in the order you selected.
continued
21