27
GB
Additional Information
MHC-EC619iP.4-467-785-22(1)
To turn o the automatic standby
function
This system is equipped with an
automatic standby function. With this
function, the system enters standby
mode automatically in about 30
minutes when there is no operation or
audio signal output.
By default, the automatic standby
function is turned on.
Use buttons on the unit to turn o the
automatic standby function.
Hold down while the system
is on, until “AUTO STANDBY OFF”
appears.
To turn on the function, repeat the
procedure until “AUTO STANDBY
ON” appears.
Notes
The automatic standby function is invalid
for the FM function.
The system may not enter standby mode
automatically in the following cases:
when an audio signal is detected.
when an iPod/iPhone is connected.
during playback of audio tracks or les.
while the preset Play Timer or Sleep
Timer is in process.
Messages
DISC ERR
You have loaded a disc that cannot be
played.
ERROR
The USB device is write-protected.
The memory of the USB device is full.
FULL
You tried to program more than 64
tracks or les (steps).
NO FILE
There are no playable les on the
CD-R/CD-RW discs or on the USB
device.
NO STEP
All of the programmed steps have
been erased.
NO USB
No USB device is connected or an
unsupported USB device is connected.
PLAY SET
You tried to select the timer when the
Play Timer is not set.
PLS STOP
You pressed PLAY MODE during
playback.
SELECT
You pressed TIMER MENU during timer
operation.
TIME NG
The Play Timer start and end times are
set to the same time.