5 Insert a disc with the label side facing right.
Notes
•Make sure you have inserted the disc into each slot at a right angle to the rotary table. If the disc is not put in straight, it may damage the player or the disc.
•Make sure the rotary table comes to a complete stop before inserting or removing discs.
With the 
label side
facing right
6 Repeat steps 4 and 5 to insert more discs.
7 Close the front cover by pushing the right edge of the cover until it clicks.
The rotary table turns and the disc slot at the loading position is set to the playing position.
Always close the front cover except when you insert or remove discs.
Removing CDs
After following Steps 1 to 3 of “Inserting CDs” on page 12, remove the discs. Then close the front cover.
Notes
•Do not insert an empty 8 cm
•Do not attach anything such as seals or sleeves to CDs. It may damage the player or the disc.
•If you drop a disc into the player and the CD won‘t go into the slot correctly, consult your nearest Sony dealer.
•When transporting the player, remove all discs from the player.
•If you want to remove the disc played, press ENTER after opening the front cover. The disc comes to the loading position. Remove the disc after the rotary table comes to a complete stop.
Tips
•To play the disc you want independently, see “Playing your favorite CD independently”.
•You can display the original Disc Memos instead of the disc numbers (see “Labeling a CD”) to locate it easily when you start playing.
When you select a
13