Listening to the radio (continued)
1 Press TUNER/BAND repeatedly until the band you want appears in the display.
The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive.
Every time you press the button, the band changes as follows:
2 band model: FM ˜ AM
3 band model:
FM n MW n SW n
or
FM n MW n LW n
2 Turn the jog dial to tune in the desired preset station.
For
You can also use TUNING + or – on the remote to tune in preset stations.
For
Turn counter- | Turn clockwise | |
clockwise for | for higher | |
lower preset | preset |
|
numbers. | numbers. | |
Preset number | Frequency |
|
1 DISC |
|
|
PLUS ONE |
| VOLUME |
| MHz | 2 3 4 5 |
To | Do this |
| ||
Turn off the radio | Press |
|
| . |
| ||||
|
| |||
Adjust the volume | Turn VOLUME (or press | |||
| VOLUME (VOL) +/– | |||
| on the remote). | |||
|
|
|
|
|
To listen to non-preset radio stations (from front panel only)
Use manual or automatic tuning in step 2. For manual tuning, press + ()/+) or – (=/0) repeatedly. For automatic tuning, press and hold + ()/+) or – (=/0).
Tips
•Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play).
•You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection).
•When an FM program is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.
•To improve broadcast reception, reorient the supplied antennas.
20