Cleaning the tape heads
Clean the tape heads after every 10 hours of use. When the tape heads become dirty
—the sound is distorted
—there is a decrease in sound level
—the sound drops out
—the tape does not erase completely
—the tape does not record
Make sure to clean the tape heads before you start an important recording or after playing an old tape. Use separately sold
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette.
Troubleshooting
If you run into any problem using this stereo system, use the following check list.
First, check that the mains lead is connected firmly and the speakers are connected correctly and firmly.
Should any problem persist, consult your nearest Sony dealer.
General
There is no sound.
•Rotate VOLUME clockwise. •The headphones are connected.
There is severe hum or noise.
•A TV or VCR is placed too close to the stereo system. Move the stereo system away from the TV or VCR.
The timer does not function.
•Set the clock correctly.
The remote does not function.
•There is an obstacle between the remote and the system.
•The remote is not pointing in the direction of the system’s sensor.
•The batteries have run down. Replace the batteries.
The color irregularity on a TV screen persists.
•Place the speakers farther away from the TV set.
Speakers
Sound comes from one channel or unbalanced left and right volume.
•Check the speaker connection and speaker placement.
continued
23
