Specifications
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 70 – 20,000 Hz; rated 32 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Continuous RMS power output
40 + 40 watts
(6 ohms at 1 kHz, 10% THD)
Music power output (North American model only)
| 75 + 75 W |
Peak music power output (Except for North | |
American models) | 550 watts |
Outputs | PHONES (stereo phone |
FM tuner section
Tuning range | 87.5 – 108.0 MHz |
Antenna | FM lead antenna |
Antenna terminals | 75 ohm unbalanced |
Intermediate frequency | 10.7 MHz |
AM tuner section
Tuning range | North American and |
| Mexican models: 530 – |
| 1,710 kHz (with the |
| tuning interval set at |
| 10 kHz) |
| Australian model: 531 – |
| 1,602 kHz (with the |
| tuning interval set at |
| 9 kHz) |
| Other models: 531 – |
| 1,602 kHz (with the |
| tuning interval set at |
| 9 kHz) |
| 530 – 1,710 kHz (with the |
| tuning interval set at |
| 10 kHz) |
Antenna | AM loop antenna |
| External antenna |
| terminals |
Intermediate frequency | 450 kHz |
jack): accepts |
headphones of 8 ohms or |
more. |
SPEAKER: accepts |
impedance of 6 to |
16 ohms. |
CD player section
System | Compact disc and digital |
| audio system |
Laser | Semiconductor laser |
| (λ=780 – 790 nm) |
| Emission duration: |
| continuous |
Laser output | Max. 400µW* |
| *This output is the value |
| measured at a distance of |
| 200 mm from the |
| objective lens surface on |
| the Optical |
| with 7 mm aperture. |
Frequency response | 40 Hz – 16 kHz (±0.5 dB) |
Tape player section
Recording system | |
Frequency response | 60 – 13,000 Hz (±3 dB), |
| using Sony TYPE I |
| cassette |
Wow and flutter | 0.1% WRMS ±0.3% (DIN) |
Tuner section
FM stereo, FM/AM superheterodyne tuner
Speaker
Tweeter:
Nominal impedance Dimensions:
Mass:
13 cm dia., cone type
2 cm dia., PIEZO type
6 ohms
Approx. 220 x 320 x
197 mm (8 3 /4 x 12 5/8 x 7 7/8 in) (w/h/d) incl. projecting parts and controls
Approx. 2.5 kg (5 lb 8 oz) net per speaker
continued
25
